How do I stick my WallStar?
Step-by-Step College WallStar Application instructions:
Step 1. Find a “Can’t Miss Spot” to show off your WallStar - Make sure to pick a smooth surface (painted drywall is best) with enough room for your BIG or REAL BIG WallStar.
Step 2. Clean the “chosen” spot on the wall - It is very important that you clean the wall with a damp cloth and allow it to dry completely (24 hours is best) before sticking your WallStar.
Note: Use warm water only! Soap or cleaning supplies can be harmful to the adhesive.
Step 3. Flatten your WallStar - The WallStar will come in a poster tube, unroll the WallStar and lay it out flat. Allow enough time for the WallStar to flatten out prior to sticking.
Step 4. Find a Friend - A WallStar is much easier to apply with four hands.
Step 5. Peel WallStar from its backing paper - With someone on each side of the WallStar, peel from top to bottom, evenly peeling the WallStar from its backing paper.
Step 6. Stick the WallStar in the “chosen” area - With the help of your friend, stick the top of the WallStar to the wall and slowly work your way down using minimal pressure to secure the WallStar. If you don’t get it exactly right the first time, no worries, it is very easy to remove the WallStar and start over.
Step 7. Smooth out the Bubbles/Wrinkles - Working from the middle to the edges, smooth out any bubbles or wrinkles in the WallStar.
Step 8. Congratulations! - You have just hung your first WallStar. Hopefully the first of many!
Important: Make sure to keep the backing paper and poster tube. It will make it much easier to transport the WallStar in the event you want to give it a new location.